摘要
通过对传统飞机制造工艺技术管理模式和标准体系的分析，结合大型灭火/水上救援水陆两栖飞机全机工艺规范的工艺技术分类管理框架，分析介绍了分类分级框架搭建方法、意义和应用，并对工艺技术分类管理提升挑战和展望进行了阐述。通过飞机制造工艺技术分类管理框架的搭建，可以在型号工艺技术应用成熟度、可扩展性、可预研性、工艺技术标准化以及供应商扩源和精益制造管理方面有所提升，进一步推动大飞机机体结构和机载设备制造向智能化、集约化、标准化发展。
关键词： 飞机；制造；工艺技术；分类；管理
Abstract
Through the analysis of the traditional aircraft manufacturing process technology classification management model and standard system, combined with the process technology classification management framework of the full-configuration process specifications for AG600. This paper analyzes and introduces the methods, significance and application of the establishment of the management. Through the establishment of the aircraft manufacturing process technology classification management framework, it is expected to achieve improvements in the maturity of process technology application in models, scalability, pre-research ability ,standardization of process technology, and expansion of suppliers and learn manufacturing management, further promoting the development of large aircraft body structure and onboard equipment manufacturing towards intelligence, intensification, and standardization.
Key words： Aircraft; Manufacturing; Process technology; Classification; Management
参考文献 References
[1] 陈银. 2024年中国航空制造行业发展现状及趋势分析 [J].华经观点. , 2024,10.
[2] 盛永清,王浩军,陈素明.MA700飞机用工艺规范适航审查方法实践.[J].中国设备工程,2020(01):236-237.
[3] 中国民用航空局.CCAR-25 运输类飞机适航标准 [M].北京:中国民用航空局,2011,58.
[4] 王志超. 民用飞机防火系统研究[J].民用飞机设计与研究.2011,(3):11-13,27.
[5] 王海.何月洲.李翰.穆家琛.民机工程验证试验的制造符合性检查[J].工程与试验.2019,(12):1-2,58.
[6] COMMISSION DELEGATED REGULATION(EU) No134/2014 of 16 December 2013, supplementing Regulation (EU) No168/2013 of the European Parliament and of the Council with regard to environmental and propulsion unit performance requirements and amending annex V thereof,02014R0134-EN-16.10.2016-001.001-1.
[7] AGREEMENT CONCERNING THE ESTABLISHING OF GLOBAL TECHNICAL REGULATIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES, ECE/TRANS/180/Add.2/ Appendix1, 2004-12-18.
[8] Jiun - Horng Tsai,Hung-Lung Chang,Yi-Chun Hsuc, ect.Development of a local real world driving-cycle for motorcycles for emission factor measurements, Atmospheric Environment39(2005)6631-6641.
[9] Nesamani,K.S.,& Subramanian, K.P. Development of a driving cycle for intra-Saleh city buses in Chennai, India[J].Atmospheric Environment,45(2011),5469-5476.
[10] 刘鑫. 民机机载电子产品制造符合性检查管理过程研究[J].无线互联科技.2020,4.
[11] 赵莉.董琼.陈政伯.浅谈工艺标准化与产品可制造性的提升[J].航天标准化.2019,3.
[12] 邱凌,等. 航空制造知识图谱构建研究综述 [J].计算机应用研究. , 2022,39(4):968-977.